Fagor CNC 8070 - Configuring the profile editor. Displayed area.; Configuring the profile editor. Define the work plane.; End the session at the editor.

Hardware configuration.
CNC 8070
LCD-15SVGA. PASSIVE MONITOR " LCD15-SVGA".
8.
Overall connection.
·183·
(REF: 1911)
8.6 Overall connection.
Power supply.
The passive screen is powered by an external DC power supply; use a 24 V DC ±10% and
2 A. power supply.
VGA video signal.
Use the VGA output of the central unit. The connection is parallel, 1 with 1, 2 with 2, etc. The
cable shield must be connected to the connector at both ends.
Cable characteristics.
Use specific VGA cable.
·VGA· cable.
Flexibility. Normal.
Type. Shielded.
Impedance. 75.
Maximum length. 30 m.
GND
BLUE
GREEN
GND_SYNC
GND_BLUE
GND_GREEN
GND_RED
5
3
2
9
8
7
6
Housing
Housing
1
4
CNC
13
11
10
15
14
12
5
3
2
9
8
7
6
1
4
13
11
10
15
14
12
MONITOR
RED
HSYNC
VSYNC
GND
BLUE
GREEN
GND_SYNC
GND_BLUE
GND_GREEN
GND_RED
RED
HSYNC
VSYNC
Fagor Automation supplies the necessary cable for the VGA connection. The cable is valid for static
installations such as cable carrying chains. For further information, refer to the Ordering Handbook.