Hardware configuration.
CNC 8070
9.
MONITOR-21 MULTITOUCH.
Specifications.
·186·
(REF: 1911)
9.1 Specifications.
Type. Description.
General. • 21.5" (1920 × 1080) monitor, multi-touch screen (10 points) and USB driver.
• Dimensions (width x height x depth)
- 558.40 × 349.80 × 47.70 mm.
- 21.98" × 13.77" × 1.88".
• Weight: 8 kg (17.6 lb)
• OSD (On Screen Display) menu; rear buttons.
Regulation. • BSMI, CE, FCC, CCC, UL.
Ambient. • Storage temperature: Between -20 and 60 °C (-4 and 140 °F).
• Working temperature: Between 0 and 55 °C (32 and 101 °F).
• Relative humidity: Between 10 and 90 % (non condensing).
• Vibration: Between 5 and 500 Hz, 1 Grms (in operation, random).
• Degree of protection: Front complies with standard IP65.
Power supply. • Power (use one of the following options).
- 24 V DC via Phoenix-type connector (recommended).
- 12 V DC via DC jack connector (consult Fagor Automation).
• Maximum consumption: 25 W.
LCD. • Type: TFT LED LCD FullHD.
• Screen: 10-point multi-touch capacitive.
• Size: 21.5" (aspect ratio 16:9).
• Screen color: 24 bits (16.7 million colors).
• Resolution: 1920 × 1080.
• Angle of vision: 178° (vertical), 178° (horizontal).
• Brightness: 300 cd/m².
• Contrast ratio: 5000:1 (typical).
• Lamp duration (MTBF): 50,000 hours.
Connectivity. • Touch controller.
- USB (recommended).
- RS-232 (consult Fagor Automation).
• Video input.
-VGA
-DVI-D
Touch controller.
Fagor Automation recommends using the USB driver for the touch screen. Consult Fagor Automation
before using the RS232 driver.
To Next Page
Loading...
