Fagor CNC 8070 - Options

Hardware configuration.
CNC 8070
9.
MONITOR-21 MULTITOUCH.
Connectors.
·196·
(REF: 1911)
·DVI-D· Video input.
DVI-D video input.
Pin. Señal.
1 TMDS 2- Red- (Link 1).
2 TMDS 2+ Red+ (Link 1).
3 TMDS 2/4 SHIELD
4 TMDS 4- Green- (Link 2).
5 TMDS 4+ Green+ (Link 2).
6 DDC clock.
7 DDC data.
8 Not used.
9 TMDS 1- Green- (Link 1).
10 TMDS 1+ Green+ (Link 1).
11 TMDS 1/3 SHIELD.
12 TMDS 3- Blue- (Link 2).
13 TMDS 3+ Blue+ (Link 2).
14 +5 V DC.
15 GND.
16 Hot plug detection.
17 TMDS 0- Blue- (Link 1) and digital synchronization.
18 TMDS 0+ Blue+ (Link 1) and digital synchronization.
19 TMDS 0/5 SHIELD
20 TMDS 5- Red- (Link 2).
21 TMDS 5+ Red+ (Link 2).
22 TMDS clock protection.
23 TMDS clock+ (Links 1 and 2).
24 TMDS clock- (Links 1 and 2).