Fagor CNC 8070 - 9.9.3 Locks and unlocks the OSD menu.

Hardware configuration.
CNC 8070
9.
MONITOR-21 MULTITOUCH.
OSD (On Screen Display) menu.
·204·
(REF: 1911)
9.9.3 Locks and unlocks the OSD menu.
Locks the OSD menu.
Unlocking the OSD menu.
Note: All images of the OSD menu are property of Advantech Co., Ltd.
Press the [Left]+[Right] keys and the following message will appear on
screen.
Do not release the keys until the screen indicates that the operation has
been completed.
Press the [Left]+[Right] keys and the following message will appear on
screen.
Do not release the keys until the screen indicates that the operation has
been completed.