Fagor CNC 8070 - Softkey menus.

Hardware configuration.
CNC 8070
10.
HORIZONTAL KEYB / HORIZONTAL KEYB+MOUSE.
Power supply for the module.
·210·
(REF: 1911)
10.5 Power supply for the module.
Connector pinout.
24 V DC universal power supply, via Phoenix
connector. See
"24 V DC voltage supply." on page 212.
24 V DC
Plug-in part. 3-pole Phoenix-type combicon connector (7.62 mm
pitch).
Pin Signal. Function.
1Chassis.
2 GND 0 V reference signal.
3 +24 V Power supply.
1