Hardware configuration.
CNC 8070
HORIZONTAL KEYB 2.0 + TOUCHPAD.
12.
Specifications.
·229·
(REF: 1911)
12 HORIZONTAL KEYB 2.0 + TOUCHPAD.
12.1 Specifications.
Model. Description.
HORIZONTAL KEYB 2.0 +
TOUCHPAD
• USB horizontal, alphanumeric QWERTY keyboard.
• Multi-touch touchpad (touch panel).
• Numeric keypad optimized to operate with the CNC (keys for
axes, feedrate, speed, etc).
• Special functions with the Fagor key.
In the operating system, customize the keyboard arrangement as "English (United States)". See
"12.7 Selecting the language and the keyboard distribution." on page 235.
Type. Description.
HORIZONTAL KEYB 2.0 + TOUCHPAD
General. • USB horizontal, alphanumeric QWERTY keyboard.
• Multi-touch touchpad (touch panel).
• Numeric keypad optimized to operate with the CNC (keys for axes, feedrate,
speed, etc).
• Special functions with the Fagor key.
• Keyboard distribution; "English (United States)".
• Dimensions (width x height x depth)
- 420 × 175 × 34 mm.
- 16.54" × 6.89" × 1.33".
• Weight: 3,065 kg (6.75 lb)
Regulation. • CE.
Ambient. • Storage temperature: Between -40 and 70 °C (-40 and 158 °F).
• Working temperature: Between 0 and 55 °C (32 and 131 °F).
• Relative humidity: 90 % RH (non-condensing).
• Vibrations: Vibration test according to IEC 60068-2-6 with a frequency step
of 1 octave/minute (±10%) and a duration of 10 sweeps. Frequency of 5 Hz
at 8.4 Hz (3.5 mm constant movement) and 8.4 Hz at 150 Hz (1 g of constant
acceleration).
• Degree of protection: IP65 (front panel).
Power supply. • Power through the USB cable.
• Maximum consumption: 0.5 W.
Connectivity. • Connection to the central unit through USB-B 2.0 (rear).
To Next Page
Loading...
