Hardware configuration.
CNC 8070
12.
HORIZONTAL KEYB 2.0 + TOUCHPAD.
General diagram.
·230·
(REF: 1911)
12.2 General diagram.
• Do not replace the cable supplied by Fagor.
• Do not connect any type of extension cord to the USB power cable.
• Connect the keyboard directly to the central unit; do not connect the keyboard to any type of hub.
ETX and Q7-A platforms.
ETX and Q7-A platforms.
CNC HORIZONTAL KEYB 2.0 + TOUCHPAD.
USB
CNC PPC-21W
USB
HORIZONTAL KEYB 2.0 + TOUCHPAD.
CAN
ETHERNET
JOG-PANEL
Connection. Description.
USB 2.0 Connection of a USB keyboard to the panel-PC. Use the keyboard cable.
Maximum cable length: 800 mm (2.62 ft).
Ethernet. Connecting the CNC to the panel-PC.
Maximum cable length: 100 m (328 ft).
CAN Connection of the operator panels.
Maximum length of bus; 500 m (1640 ft) for CANopen bus.
To Next Page
Loading...
