Hardware configuration.
CNC 8070
12.
HORIZONTAL KEYB 2.0 + TOUCHPAD.
Voltage supply for the module.
·234·
(REF: 1911)
12.5 Voltage supply for the module.
Power the module through the keyboard’s USB cable.
Cable characteristics.
Consumption.
Maximum consumption: 0.5 W.
Rear view.
• Do not replace the cable supplied by Fagor.
• Do not connect any type of extension cord to the USB power cable.
• Connect the keyboard directly to the central unit; do not connect the keyboard to any type of hub.
Characteristic. Description.
Type. USB cable, type A-B.
Shielded cable. 4-Wire cable in twisted pairs.
Characteristic impedance. 90 ± 15 %.
Length. 0.8 meters (0.03 inches).
Bending radius. Fixed installation: 5 x d (d=7 mm).
Flexible installation: 10 x d (d=7 mm).
Resistance to oils. Meets the DIN EN 60811-2-1 standard
To Next Page
Loading...
