Hardware configuration.
CNC 8070
OP-PANEL / OP-PANEL+SPDL RATE.
13.
Specifications.
·239·
(REF: 1911)
13 OP-PANEL / OP-PANEL+SPDL RATE.
13.1 Specifications.
The machine manufacturer must comply with the EN 60204-1 (IEC-204-1) regulation regarding
electrical shocks in case of defective input/output pins with external power supply when not plugging
the connector before turning the power supply on.
Module. Description.
OP-PANEL CAN operator panel 420 mm (16.54") with spindle override.
Possibility to connect up to three electronic handwheels.
OP-PANEL+SPDL RATE CAN Operator panel 420 mm (16.54") with spindle override switch.
Possibility to connect up to three electronic handwheels.
OP-PANEL
OP-PANEL+SPDL RATE
Type. Description.
General. • Jog switch (0 - 200 %).
• 16 configurable user keys.
• 15 configurable jog keys.
• Speed override key (OP-PANEL).
• Speed override switch (OP-PANEL+SPDL RATE).
• CNC power-down key.
• Dimensions (width x height x depth)
- 420 × 175 × 54.5 mm.
- 16.54" × 6.89" × 2.15".
Safety. • CE
Ambient. • Degree of protection: IP65 (front panel).
Power supply. • 24 V DC universal power supply, via Phoenix connector.
Connectivity. • Connecting the central unit via CAN bus (CANopen/CANfagor).
• Three handwheels with A and B signals (5 V DC TTL).
To Next Page
Loading...
