Fagor CNC 8070 - Save and load the tables

Hardware configuration.
CNC 8070
13.
OP-PANEL / OP-PANEL+SPDL RATE.
Power supply for the module.
·244·
(REF: 1911)
13.5 Power supply for the module.
Connector pinout.
24 V DC universal power supply, via Phoenix
connector. See
"24 V DC voltage supply." on page 246.
24 V DC
Plug-in part. 3-pole Phoenix-type combicon connector (7.62 mm
pitch).
Pin Signal. Function.
1Chassis.
2 GND 0 V reference signal.
3 +24 V Power supply.
1