Hardware configuration.
CNC 8070
CNC-FPS. FAGOR-UPS (Q7-A PLATFORM ONLY).
16.
·259·
(REF: 1911)
16 CNC-FPS. FAGOR-UPS (Q7-A PLATFORM ONLY).
If there is an unexpected power failure, the UPS prevents an unexpected shutdown of the
CNC. The UPS provides the central unit sufficient time to save data onto the FRAM and
execute the shutdown sequence.
• Read the manufacturer's instructions accompanying the product carefully before using the UPS.
• Use the UPS to power the central unit; DO NOT power any other device.
• Do not dispose of the UPS in fire.
• Do not short-circuit the terminals of the battery.
To Next Page
Loading...
