Hardware configuration.
CNC 8070
INSTALLING AND CONFIGURING A THIN CLIENT (EPATEC
17.
Configuring the Thin Client.
·269·
(REF: 1911)
17.2.3 Configuring the startup of the Thin Client.
The BIOS must be modified in order for the Thin Client to start up automatically when
powered on, without having to press the ON button. Having the Thin Client OFF, connect
the external keyboard and, while starting up, press the [DEL] key to access the BIOS. The
right side of the BIOS shows a menu with the instructions to browse through the BIOS.
• Once in the BIOS, select "Advanced > APM configuration" and access the options
menu.
• Inside the menu "APM configuration", set the "Restore on AC/Power Loss" to
[Power On].
• Get out of the BIOS saving the changes.
The BIOS is an essential part in the operation of the Thin Client. Do not change any other parameter
of the BIOS. The wrong manipulation of the BIOS parameters may render it useless.
To Next Page
Loading...
