Hardware configuration.
CNC 8070
CONFIGURATION.
2.
Central unit (Q7-A platform).
·29·
(REF: 1911)
2 CONFIGURATION.
2.1 Central unit (Q7-A platform).
2.2 Central unit (ETX platform).
Identification. Description.
U65
• In-cabinet Central Unit
• Connecting to a DVI-D monitor.
• Connecting to keyboards and operator
panels via the CAN.
• Connecting to keyboards via the USB.
Identification. Description.
U65
• In-cabinet Central Unit
• Connecting to a VGA monitor.
• Connecting to keyboards and operator
panels via the CAN.
To Next Page
Loading...
