Hardware configuration.
CNC 8070
2.
CONFIGURATION.
Monitor.
·30·
(REF: 1911)
2.3 Monitor.
2.4 Central unit + Monitor.
The central unit is located on the rear of the monitor.
Identification. Description.
MONITOR-21W MULTITOUCH
MONITOR-21W MULTITOUCH NEUTRO
• Type: TFT LED LCD FullHD.
• Screen: 10-point multi-touch capacitive.
• Size: 21.5" (aspect ratio 16:9).
• Screen color: 24 bits (16.7 million colors).
• Resolution: 1920 × 1080.
Identification. Description.
C70-15
C70-15T (discontinued)
• The central unit is located on the rear of the
monitor.
• 15" (1024 × 768 pixels) monitor, aspect ratio
4:3, 24-bit color.
• USB 2.0 port, at the front, protected by a
cover.
• Touch screen (only C65-15T).
C70-15AT
• The central unit is located on the rear of the
monitor.
• 15" (1024 × 768 pixels) monitor, aspect ratio
4:3, 24-bit color.
• USB 2.0 port, at the front, protected by a
cover.
• Capacitive multi-touch screen, optimized for
the machine tool sector, including work using
gloves typically found in the sector.
To Next Page
Loading...
