Fagor CNC 8070 - Chapter 1 Description of the Keys; Monitor LCD-15.

Hardware configuration.
CNC 8070
CONFIGURATION.
2.
CAN remote modules.
·33·
(REF: 1911)
2.10 CAN remote modules.
Remote modules may be used to have extra resources distributed at different locations of
the machine or installed in the electrical cabinet.
Identification. Description.
RIO5 series
• CAN communication (CANopen protocol).
• Digital inputs and outputs.
• Analog inputs and outputs.
• Analog inputs for PT100 temperature
sensors.
RIOW series
• CAN communication (CANopen protocol).
• Digital inputs and outputs.
• Analog inputs and outputs.
• Analog inputs for PT100 temperature
sensors.
RIOR series
• CAN communication (CANopen protocol).
• Digital inputs and outputs.
• Analog inputs and outputs (configurable to
voltage or current).
• Analog inputs for PT100 temperature
sensors.