Fagor CNC 8070 - Chapter 3 How to Operate the CNC; General description of the interface.

Hardware configuration.
CNC 8070
CENTRAL UNIT + MONITOR (ETX PLATFORM).
5.
Specifications.
·49·
(REF: 1911)
5.3 Specifications.
Type. Description.
General. • Monitor set with the central unit attached on the rear. The CN70-10K model
also comes with a keyboard and operator panel.
• Touch screen (models C70-15T / C70-15AT).
• USB 2.0 port, at the front, protected by a cover.
• Dimensions of C70-15 / C70-15T (width × height × depth).
- 420 × 350 × 124 mm.
- 16.54" × 13.78" × 4.88".
• Dimensions of C70-15AT (width × height × depth).
- 420 × 350 × 124 mm.
- 16.54" × 13.78" × 4.88".
• Dimensions of C70-10K (width × height × depth).
- 420 × 350 × 126 mm.
- 16.54" × 13.78" × 4.96".
• Dimensions of U70 (width x height x depth).
- 90 × 250.3 × 254 mm.
- 3.54" × 9.85" × 10.00".
System. • Choice of processor.
- Processor: Pentium M 1.1 GHz.
- Processor: T56N Mono Core 1.6 GHz.
- Processor: T56N Dual Core 1.6 GHz (only for model OL).
• RAM memory.
- 1 GB ( model BL).
- 2 GB ( model OL).
• Storage.
- 2 GB CompactFlash (model BL).
- CompactFlash de 4 o 32 GB (model OL).
• RAM memory with battery.
• CMOS battery accessible from the outside, CR2450 / CN371 (depending on
the CNC model).
• Choice of OS image:
- Windows7A (C70-15AT multi-touch)
- Windows7 (C70-10K / C70-15AT single-touch).
- WindowsXP (C70-10K / C70-15AT single-touch).
LCD. • C70-15 / C70-15T.
- Type: TFT LCD.
- Screen: Touch-screen.
- Size: 15" (aspect ratio 4:3).
- Resolution: 1024 x 768 pixels.
• C70-15AT.
- Type: TFT LCD.
- Screen: Capacitive multi-touch (projected capacitive).
- Size: 15" (aspect ratio 4:3).
- Resolution: 1920 x 1080 pixels.
• C70-10K.
- Type: TFT LCD.
- Size: 10.4" (aspect ratio 4:3).
- Resolution: 800 x 600 pixels.
•U70.
- Without monitor.
Regulation. • CE.
Packaging. • Meets EN 60068-2-32 standard.
• Free fall packaged according to Fagor regulations (1 meter):
Ambient. • Operating temperature: -40 ~ 70 °C (-40 ~ 158 °F).
• Working temperature: 0 ~ 45 °C, with a mean of 35 °C.
(32 ~ 113 °F, with a mean of 95 °F).
• Relative humidity: 20 ~ 85 % RH (without condensation).
• Maximum work altitude: Meets the "IEC 1131-2" standard.
• Vibration: Sweep sine trial with a frequency step of 1 octave/minute (±10 %)
and 10 sweeps long.
-9 Hz  f  5 Hz; Constant movement with an amplitude of 3 mm.
- 200 Hz  f  9 Hz; constant acceleration of 1g.
• Degree of protection: IP65 (front), IP20 (rear).