Fagor CNC 8070 - 5.8.2 Central unit. Peripheral board.

Hardware configuration.
CNC 8070
CENTRAL UNIT + MONITOR (ETX PLATFORM).
5.
Hardware functionality. Connectors.
·65·
(REF: 1911)
5.8.2 Central unit. Peripheral board.
VGAIOIOIPROBE 1/2
·VGA· connector.
Connection to an off-the-shelf VGA monitor.
Emergency relay.
Relay for the emergency chain.
·PROBE· connector.
Connection of 2 probes.
Serial port.
RS232, RS422 or RS485 serial line.
Ethernet.
Type A USB connector.
Mouse with PS-2 connector.
Type A USB connector.