CENTRAL UNIT + MONITOR (ETX PLATFORM).
5.
Hardware functionality. Connectors.
·BATTERY· connector .
Connecting the emergency battery for voltage supply and
charging it.
Ground connection.
Auxiliary 24 V DC output.
Auxiliary 24V output to supply the operator panel.
Protection fuse.
Fuse for protection against over-voltage (higher than 36 V
DC or 25 V AC).
·LATCH· button and status LED.
This button may be used to reactivate the power supply
after an over-current.
24 V DC voltage supply.
Voltage supply for the central unit.
To Next Page
Loading...
