Hardware configuration.
CNC 8070
CENTRAL UNIT + MONITOR (ETX PLATFORM).
5.
Hardware functionality. Connectors.
·73·
(REF: 1911)
5.8.5 PCI expansion board (only for the MCU model).
Electrical characteristics of the PCI expansion.
Characteristic. Description.
Board size. Half Size.
Connector. PCI 5 V.
Interface. PCI 32 bit 33 MHz
Power supply. 5 V / 2 A - 3.3 V / 2.5 A
(Both may be used with a maximum consumption of 15W).
V(I/O) May be set for 5V or 3.3 V using a jumper (by default, 5 V).
Slot for PCI board (Half Size).
To Next Page
Loading...
