Hardware configuration.
CNC 8070
CENTRAL UNIT + MONITOR (Q7-A PLATFORM).
6.
·93·
(REF: 1911)
6 CENTRAL UNIT + MONITOR (Q7-A PLATFORM).
Configurations available for the CNC 8065 and 8070. All compact and modular models have
a USB 2.0 port at the front, protected with a cover.
Do not get into the inside of the unit. This unit MUST NOT be opened by unauthorized personnel. Only
personnel authorized by Fagor Automation may access the interior of this unit.
Model. Differences.
C70-10K • Compact CNC; monitor, central unit, keyboard and operator panel.
• 10.4" (800 × 600 pixels) monitor, aspect ratio 4:3, 18-bit color.
C70-15 • Modular CNC; monitor and central unit.
• 15" (1024 × 768 pixels) monitor, aspect ratio 4:3, 24-bit color.
• Connection for a USB or CAN keyboard.
• Connection for a CAN operator panel.
C70-15AT • Modular CNC; monitor and central unit.
• 15" (1024 × 768 pixels) monitor, aspect ratio 4:3, 24-bit color.
• Capacitive multi-touch screen, optimized for the machine tool sector,
including work with gloves typically found in the sector.
• Connection for a USB or CAN keyboard.
• Connection for a CAN operator panel.
C70-10K
C70-15
To Next Page
Loading...
