Fagor CNC 8070 - 6.1 Specifications.

Hardware configuration.
CNC 8070
CENTRAL UNIT + MONITOR (Q7-A PLATFORM).
6.
Specifications.
·95·
(REF: 1911)
6.1 Specifications.
Type. Description.
General. • CNC models.
- C70-10K (models with non-touch monitor).
- C70-15 (models with non-touch monitor).
- C70-15AT (models with capacitive multi-touch monitor).
• Dimensions of C70-10K (width × height × depth).
- 420 × 350 × 68 mm.
- 16.54" × 13.78" × 2.68".
• Dimensions of C70-15 (width × height × depth).
- 420 × 350 × 68 mm.
- 16.54" × 13.78" × 2.68".
• Dimensions of C70-15AT (width × height × depth).
- 420 × 350 × 63 mm.
- 16.54" × 13.78" × 2.48".
System. • Processor:
- 8070 OL - CP-IC-E354-4-4.
- 8070 L (select) - CP-IC-E352-2-2.
- CP-IC-E354-4-4.
•RAM:
-2 GB.
• Non-volatile RAM (FRAM).
• Storage (select):
(SO, CNC and user programs.
- Internal 4 GB NandFlash.
- Internal 8 GB NandFlash.
• Storage expansion (optional):
(additional storage space for user programs).
- CFast 32 GB.
- CFast 128 GB.
• Without fan.
• Without battery.
•SO (select):
- Windows 7 (32 bits).
- Windows 7A (32 bits multi-touch).
LCD. • C70-10K.
- TFT 18-bit color LCD.
- 10.4" (ratio 4:3) 800 × 600 pixels
- Non-touch screen.
• C70-15.
- TFT 24-bit color LCD.
- 15" (ratio 4:3) 1024 × 768 pixels
- Non-touch screen.
• C70-15AT.
- TFT 24-bit color LCD.
- 15" (ratio 4:3) 1024 × 768 pixels
- Capacitive multi-touch screen.
Regulation. • CE.
Packaging. • The package meets the regulation EN 60068-2-32 procedure 1 with a
random fall from a height not greater than 1 m.