E
XAMPLES
MANUAL
Chapter 2
Page 23 of 96
Conversational
programming
Exercise 3. Cam
CNC 8070
EXERCISE 3. CAM
The purpose of the following exercise is to make a cam from a stock whose dimensions are 310
x 160.
Making this part requires the following steps:
Operations Tools
Surface milling Endmill Ø100 T1 D1
2D pocket Endmill Ø20 T2 D1
Circular pocket Endmill Ø10 T3 D1
2D pocket Endmill Ø8 T4 D1
ISO coordinate rotation
To Next Page
Loading...
