Fagor CNC 8070 - Chapter 3 How to Operate the CNC; General description of the interface.

E
XAMPLES MANUAL
Chapter 2
Page 43 of 96
Conversational
programming
Exercise 5. 3D
pockets with islands
CNC 8070
EXERCISE 5. 3D POCKETS WITH ISLANDS
The purpose of the following exercise is to make a cam from a stock whose dimensions are 50
x 70.
Making this part requires the following steps:
Operations Tools
Surface milling Endmill Ø100 T1 D1
3D pocket Endmill Ø5 T9 D1