OF 96
E
XAMPLES
MANUAL
ISO programming
Exercise 13.
Canned cycles 2
Chapter 3
Page 82 of 96
CNC 8070
EXERCISE 13. CANNED CYCLES 2
Any cycle, once defined, may be repeated in several ways using multiple machining.
1. G160 - Multiple positioning in a straight line.
2. G161 - Multiple positioning in a parallelogram pattern.
3. G162 - Multiple positioning in a grid pattern.
4. G163 - Multiple positioning in a circular pattern.
5. G165 - Multiple positioning using an arc chord.
G0 Z100
T6 D1
M6
S1000 M3
G99 X-100 Y60 F1000 Coordinate of the first drilling point (hole).
G81 Z2 I-10
G162 I40 K6 J-40 D4 Multiple machining in a grid pattern.
G0 G80 Z100
M30
To Next Page
Loading...
