·172·
Operating manual
CNC 8070
9.
PROFILE EDITOR
(REF: 1505)
Interface description.
Softkey menu.
The options that may be selected from the softkey menu make it possible to edit profiles,
modify edited profiles, select the zoom, the work plane, undo the last change and end the
editing session. While editing or modifying the profile, the softkey menu offers the option to
undo the last operation. Likewise, it offers the option to save the profile at any time.
Softkey. Meaning.
Edit Edit a new profile, enlarge an existing profile or import a profile saved in
DXF format. See "9.2 Define a new profile, enlarge an existing one or
import one from a file." on page 174.
Modify Modify, insert or delete elements of a profile. See "9.3 Modify a profile
and insert corners" on page 181.
Displayed area Modify the zoom of the graphics area. See "9.4 Configuring the profile
editor. Displayed area." on page 183.
Plane Define the work plane. See "9.5 Configuring the profile editor. Define the
work plane." on page 183.
End End the profile editing session and insert the edited profiles into the
program. See "9.6 End the session at the editor." on page 183.
Undo Undo the last operation.
Save and continue Save the profile and continue editing. Using this key does not require that
the profile be completed.
To Next Page
Loading...
