·220·
Operating manual
CNC 8070
13.
HD GRAPHIC ENVIRONMENT (LATHE MODEL)
(REF: 1505)
Select the type of view.
13.3 Select the type of view.
This option is used to select the point of view of the part. Since the screen may be divided
into 4 windows, the softkey only affects the active window (the one having the focus). The
screen may be selected with the tab key or with the keys [1] through [4] (depending on the
window to be selected).
• Top view.
• Front view.
• Left view.
• Right view.
• First user view.
• Second user view.
• Save the current view as user view.
• Select the part to be displayed.
User views.
The top view, front view and side views are predetermined views that may be moved or
rotated with the mouse or with the following keys.
The new position and orientation of the part may be saved as a user view. The CNC keeps
the saved user views even after being turned off.
Select the part to be displayed.
The graphics may have defined up to four different parts. Each of the four windows that the
screen may be divided into may display the same part or different parts. The following
softkeys only affect the active window (the one having the focus).
Key. Meaning.
Rotate the part.
Move the part to the left or to the right.
Move the part up or down.
Softkey. Function.
General view of all the parts.
See the first part that the active channel is working on. When
changing channels, the displayed part changes. If several
channels are working on the same part, all of them can show
the same part.
View the first part. The menu shows a softkey per available
part.
To Next Page
Loading...
