Operating manual
CNC 8070
TOOL AND MAGAZINE TABLE
16.
(REF: 1505)
·269·
Magazine table
16.8.2 List of magazine positions
The list of magazine positions appears on the left panel of the tool magazine table. For each
position, it indicates whether it is free, disabled or has a tool. For each tool, it shows the
remaining life time (when using tool life monitoring) and the family it belongs to.
Magazine position
The status of a position is indicated with a symbol next to the position number.
• The position is free (white filled circle).
• The position is semi-free (black-and-white filled circle).
• The position is occupied (black filled circle).
• The position is disabled (red filled circle).
Tool number
Number of the tool occupying the magazine position.
Remaining life
If the tool life monitoring is active, shows the remaining life, either in machining time or in
the number of operations to be carried out or the tool status (rejected or worn out).
Tool family
Family the tool belongs to, defined by the user in the tool table.
To Next Page
Loading...
