Operating manual
CNC 8070
PLC
18.
(REF: 1505)
·311·
"Outputs" service
18.8.1 Softkey menus. Options of the "Outputs" service.
When accessing the "Outputs" service, the softkeys will show the following option.
Outputs "Compiling info"
Outputs "Checking info"
This softkey shows the result of analyzing the file of mnemonics. The screen shows a list
of the error detected when analyzing the program. After selecting a warning or error from
the list, it is possible to go to the erroneous line by pressing the relevant icon.
Outputs "Search info"
This softkey shows the result of searching text in the programs making up the PLC project.
After selecting an element from the list, it is possible to go to its line by pressing the relevant
icon.
This softkey shows the result of compiling (generating) the PLC program. The screen shows
a list of warning or errors detected when compiling the PLC program. After selecting a
warning or error from the list, it is possible to go to the erroneous line by pressing the relevant
icon.
To Next Page
Loading...
