Operating manual
CNC 8070
PLC
18.
(REF: 1505)
·317·
"Monitoring" service
18.10 "Monitoring" service
This service is used to analyze the status of the various PLC variables and resources. When
selecting the "Monitoring" option at the service window, it will show a list with the three
resource files used last. This will let you recover one of them without having to define it again.
Pressing the "Show" softkey access the service screen. If a file was selected from the list,
it will show the resources defined in it. To close the monitoring window, press [ESC].
Description of the monitoring service
This service screen is divided into several windows that may be accessed with the window
switching key. The monitoring screen looks like this:
A Resources selected for monitoring. This area shows the user resources and symbols
being analyzed. The resources and symbols are shown grouped in the following tables,
each of them shows information on the status of those resources.
B Data entry area. This area is used to define the user resources and symbols to be
analyzed and modify their values by directly assigning a value to them.
Softkey menus
When selecting this service, the horizontal softkey menu will show all the options associated
with resource monitoring. The set of options offered by this menu may be changed using the
"+" softkey which offers a new set of options.
Timers Counters
Registers Binary resources
To Next Page
Loading...
