Fagor CNC 8070 - Statistics service

Operating manual
CNC 8070
PLC
18.
(REF: 1505)
·323·
"Statistics" service
18.12 "Statistics" service
The "Statistics" service may be used to obtain information about the execution times of the
PLC and the files making up the PLC project. Pressing the "Show" softkey access the service
screen. To close the statistics screen, press [ESC].
Description
The screen of this service looks like this:
A Execution time-table.
This table shows the following data (from left to right):
• Modules making up the PLC program.
• Minimum module execution time.
• Maximum module execution time.
• Average module execution time.
• Module execution frequency.
B PLC file table.
This table shows the following data (from left to right):
• Files making up the PLC project.
• Size of each file.
• File type.
• Date last modified.
A
B