Operating manual
CNC 8070
PLC
18.
(REF: 1505)
·329·
"Messages" service
18.13.4 Displaying PLC errors
When activating an error (marks "ERR1" through "ERR1024"), part-program execution is
interrupted and the center of the screen displays a window with the error number and its
associated text. If the error has been defined so it shows a file with additional information,
it will be displayed at full screen. If the error has the "Emergen" field selected, the error will
open the emergency relay of the CNC.
Error window.
When there is an active error, no other action but eliminating the error state is allowed.
Although the window displaying the errors may be closed by pressing [ESC], it does not mean
that the error status has been taken care of. To do that, press [RESET]. Pressing the [RESET]
key assumes the initial conditions.
File with additional information
The files with additional information, defined by the machine manufacturer, may be displayed
automatically when activating the message (if so defined in the table for messages and
errors) or when requested by the user (at the message window). The following keys are
available to move around in the additional information window depending on the type of file
displayed (TXT, BMP, JPG, HTM, HTML or AVI):
TXT, BMP, JPG, HTM, HTML file.
AVI file.
If the error has a file with additional information associated with it, an access icon will appear
to the right of the error number. If the error has the "Show" field selected, the CNC shows
the additional information file directly on the screen. If the "Show" field is not selected, the
additional information file will be displayed when pressing the [HELP] key or when clicking
on the icon mentioned earlier. To close the additional data window, press [ESC].
Key. Meaning.
Scroll the window line by line.
Scroll the window page by page.
Take the window to the beginning or to the end.
Key. Meaning.
Stop the video and move to next frame or previous frame.
Stop the video and move to the next 5 frames or to the
previous 5 frames.
Stop the video and move to the end or to the beginning.
Stop the video.
Play the video.
To Next Page
Loading...
