Fagor CNC 8070 - Software Diagnosis

·400·
Operating manual
CNC 8070
22.
DIAGNOSIS
(REF: 1505)
Configuration diagnosis
22.2.2 Software diagnosis
This option may be used to analyze the modules that make up the CNC software and the
software options installed.
Module information
When selecting this configuration element, the diagnosis window shows the list of the
modules that make up the CNC software.
A Modules listing.
B Detailed information of the selected module.
It shows the size of each module (in bytes) and the date it was created. When selecting a
module from the list, the bottom of the screen shows more detailed information.
Software options
When selecting this element of the configuration, the diagnosis window shows the software
options currently installed.
It also shows the horizontal softkey "Validation code" for entering the resulting validation code
according to the hardware ID of the unit and the desired options.
A
B