·410·
Operating manual
CNC 8070
23.
APPS
(REF: 1505)
Send emails.
23.1.1 Configure and activate the application.
The main window of the application may be used to configure the email service (configuration
of network, email accounts and filters), activate the service, close the window and it also
shows a log of the events occurring at the CNC.
The application logs in the file FAemailsenderLOG.txt all the emails sent and errors coming
up during the execution of the application.
Configure the application.
• As mail server, it is possible to use one of the predefined external servers (requires
Internet connection) or the internal server of the company by entering its name.
• When using the company mail server, the SMTP port, the SSL protocol being used and
the authentication protocol depend on the configuration of the network. The user and the
password also depend on the configuration of the network.
Notification level.
Select the type of event that generates an email; at least one of them must be selected for
the application to work.
(A) Configure the application.
(B) Notification level.
(C) Filters for errors, warnings and messages.
(D) Activate/deactivate the application.
(E) Info window.
(F) Close or minimize the application.
This icon is used to access the application configuration window. The architecture
of the network must be known before carrying out this configuration. The
configuration is saved in the file FAemailsender.config.
To Next Page
Loading...
