18
2 / USING YOUR APPLIANCE
Gas is supplied to each burner via a tap which
is opened by pressing and turning the gas
control knob anti-clockwise.
The black
“
●
”
indicates the closed position.
— Choose the desired burner by using the
symbols located near the control knobs (e.g. :
right hand side burner ).
The control knobs on your hob are fitted with
an integrated burner-ignition system.
— To light a burner, press in and turn the
control knob anti-clockwise to the
maximum setting .
— Hold down the control knob to produce a
series of sparks until the burner lights.
The setting for more moderate flame
intensities is between the symbol and
the symbol.
Tip
If a control knob becomes difficult to
turn, do not force it. Call the installer for
emergency repairs.
If the flame is extinguished accidentally, re-
ignite as normal following the burner
ignition instructions.
•
Fig. 01
SWITCHING ON THE GAS BURNERS
To Next Page
Loading...
