Fagor Cooking hob - Regular Care of Your Appliance; Appliance Cleaning and Maintenance

20
PRODUCTS/ACCESSORIES
TO BE USED
. Small, hard-bristled brush.
. Safety pin.
. Gentle scouring cream.
. Cleaning sponge.
- Cleaning sponge.
- Special vitroceramic glass
products (e.g.: Cera-Clean).
Warning
- Never clean your appliance while it is in operation. Set all the electric and gas
controls to zero.
- WARNING: if a crack appears in the surface, disconnect the appliance from the power
supply to prevent any risk of electric shock.
Tip
— We recommend cleaning hob fittings by hand rather than in a dishwasher.
—
Do not use an abrasive sponge to clean your hob.
—
Do not use a steam cleaner.
CARING FOR YOUR APPLIANCE
•
MAINTENANCE......
Of the spark plugs
and injectors
Of the pan supports
and gas burners
Of the glass
worktop
3 / REGULAR CARE OF YOUR APPLIANCE
ACTION
If spark plugs become soiled, clean them
using a small, hard-bristled brush (non-
metallic).
The gas injector is located in the centre of
the burner in the form of a crucible. Avoid
obstructing the injector during cleaning, as
this will adversely affect hob performance.
Use a safety pin to unclog the injector if it
becomes obstructed.
For tough stains, use a non-abrasive
cream, then rinse with clean water.
Carefully wipe each part of the burner
before re-using your hob.
- Clean with warm water and then wipe.
For tough stains, use products designed
for vitroceramic glass.