40
13.5 START BUTTON
Part number: Z213033
Note: There has been a modification on the start button for Fagor dishwashers. The new one is more
ergonomic and 1 of terminals (green connection) is in a different position. However they are
exchangeable and connections don’t change either, as it is shown on the pictures and drawings below.
OLD CONNECTIONS NEW CONNECTIONS
TOOLS NEEDED:
Phillips Screwdriver (#2)
PROCEDURE:
1- Slide out front panel
2- Remove connections
3- Replace with the new timer
4- Reconnect and Reassemble following
process inversely
Time estimated: 15 minutes
TOP
GREEN CAP
To Next Page
Loading...
