• Set the end of cooking time required by pressing
the + or -
buttons.
Example shown : end of cooking
at 1 pm (13:00)
The end of cooking is automatically recorded after a few seconds.
Following these operations, the heating of the oven is delayed so that cooking
ends at the set time (e.g. : 13h00).
When the cooking starts the end of cooking symbol is off.
When the cooking time is over (the pre-programmed time ends),
- The oven switches off,
- The cooking time symbol goes out,
- The display shows 0:00
- The oven gives a series of bleep for several minutes.
To stop the bleeping, press any of the buttons on the panel. The time of day will
then be displayed again.
96
It is possible to :
- Change the cooking time at any moment.
- Consult the remaining cooking time at any moment by
pressing on the button.
- Cancel the programmed cooking cycle at any moment by
button pressed in until you hear a beep.
Warning! At this point you must switch the temperature and
method controls off; otherwise the oven will start warming up
again.
How to use your oven
To Next Page
Loading...
