12 Rev 0.0
USER INSTRUCTIONS
EN
1
On/off button
Press to power the appliance.
2
Program indicator lights
These show which program is selected and whether there are any troubleshootings
(error messages).
3
Program selection button
Press in sequence to select the required program.
4
Add salt indicator light
Shows the appliance has run out of salt.
5
Add rinse aid
Shows the appliance has run out of rinse aid.
6
Supplementary program button
Press to select one of the fi ve supplementary programs (see table 3-02b).
7
Supplementary program indicator light
Shows that one of the fi ve supplementary programs will be run (see table 3-02b).
8
Sanitation indicator light
Shows that the function is active.
9
Half-load wash button
Press to select the half-load wash option.
10
Half-load indicator lights
One of the lights shines to show that the half-load wash function has been selected in
the upper or lower rack.
11
Program delay button
Press to delay the start of the program up to 9 hours.
12
Information display (start delay, adjusting water softener)
Table 3-01
3.2 Setting the washing program and switching
it on and off
The dishwasher is equipped with a control panel (see fi g. 3-02) which is used
to program the appliance and switch it on and off.
END
P
AUTO
Sanitized
To Next Page
Loading...
