Any manipulation of the oven or cooking hob for the purposes of installation,
maintenance, etc. must be carried out with the oven disconnected from the
mains electricity.
IMPORTANT
6
1. SAFETY NOTICES
INSTALLATION AND ASSEMBLY
1.1.
• Once all the packaging materials have been removed, check that the oven is
not damaged and that the power cable is in perfect condition. If you detect any
damage or minor problems due to the transportation of the oven, do not use it
and call the Customer Service Centre.
• Any work required for installing and repairing this oven must be done solely and
exclusively by an authorised fitter and following the manufacturer’s instructions.
The manufacturer declines any and all liability if the current standards are not
complied with.
• The identification plate on the lower front part of the oven provides the technical
details and identification number of the apparatus. This must be consulted
before proceeding with any electrical connections.
• It is dangerous to alter the characteristics or modify the product in any way.
• For reasons of electrical safety, installable ovens must be fitted into appropriate
units and these must comply with the standards currently in force for this
purpose.
To Next Page
Loading...
