Fagor QC-PDS - Page 102

 Drives
138
3.
DRIVES
Single-drives
· 102 ·
Ref.2003
· 102 ·
QC-PDS
HARDWARE
QC-DR-040-F  | QC-DR-055-F 
Female aerial plug connector with screw connection with tension sleeve
supplied as an accessory. They are used to connect the power to the
motor. Accordingly, this connector will be available for the indicated models
to power the motor.
Pinout
The pinout is printed on the connector as U-V-W .
Installation
See section, 8.5.3 MOTOR POWER CONNECTION.
Connector data
Nr of poles 3
Gap (mm) 10.16
Min./max. tightening torque (N·m) 1.2/1.5
Flat screwdriver, size (mm) 1.0 x 4.0
Minimum section (mm²)
See table T. H3/5
Maximum section permitted (mm²)
16
Maximum nominal input current (A)
42
Connection data
Length to strip (mm) 12