Fagor SPD 3.150 - Page 176

Drive modules
188
3.
DRIVE MODULES
Compact drives
176
DDS
HARDWARE
Ref.1310
X5 connector
X5. RS-232 serial line
Connector for the RS-232 serial line board that may come on compact
drives. It is a 9-pin male sub-D connector for RS-232 serial connection to
a PC in order to set the module configuration parameters and to adjust it.
The description of the pins of this connector is:
F. H3/129
Connector X5. RS-232 serial line.
T. H3/25 Description of the pins of connector X5.
(*) Reserved pins must not be connected.
1 N.C. Not connected
2 R x D Receive data
3 T x D Transmit data
4 + 5 V Supply outputs
5 GND Reference 0 V
6 N.C. Not connected
7 N.C. (*) Reserved
8 N.C. Not connected
9 N.C. (*) Reserved
CH CHASSIS Cable shield
6
7
8
9
1
2
3
4
5
2
3
4
5
7
9
RxD
TxD
+5V
GND
RESERVED
RESERVED
RxD
TxD
+5V DC
GND