Fagor Xperta CAT-44 NG - Machine Parts (Fig 1); Top View (Fig. 2); Control Panel (Fig. 3)

1 Figure captions
1.1 Machine Parts (Fig 1)
A Top view (see Fig. 2)
B Bean container with lid
C Service cover
D Selection dial for steam and hot water
E Height-adjustable dispenser with
outlets
F Swivel nozzle for steam and hotwater
with removable frothing aid
G Container (removable)
H Drip grille
I Drip tray float
J Drip tray
K Display
L Type plate (at top behind service cover)
M Control panel (see Fig. 3)
N Water tank with fill level indicator
(removable)
O Test strip for water hardness
O.1 Descaling agent
O.2 Cleaning agent
P Measuring spoon with cleaning brush
1.2 Top View (Fig. 2)
Q Cup rack
R Opening for ground coffee
with lid (ground coffee filler)
S Bean container position setting
T Service cover release button
U Release catch for removing grinding
ring
V Lever for setting grinding texture
1.3 Control Panel (Fig. 3)
a Key „Steam Pre-selector“
(with indicator)
b Key „1 or 2 cups of coffee“
(with indicator)
c Key „Coffee Quantity“ *
(with indicators)
* With menu selected (key f) this key
serves for „paging“ in the menu
d Key „Cup Measure“ **
(with indicators)
** With menu selected (key f) this key
serves for „paging“ in the menu
e Key „Rinse“ (with indicator)
f Key „Menu“ (with indicator)
g Key „OK“ (with indicator)
h „On/Off“ key (with indicator)
i „Coffee machine heating“ indicator
j „Waste container“ indicator
k „Fill water tank“ indicator
GB