x2
x2
909920-01
V210 & V220 VINYL RAILING
INSTALLATION GUIDE
* Number of Vinyl Balusters Included in Level Kits:
Square Turned
6' Railing Kit 13 14
8' Railing Kit 18 19
10' Railing Kit 22 24
* Number of Vinyl Balusters Included in Stair Kits:
Square Turned
6' Railing Kit 12 13
8' Railing Kit 17 18
Always use safety equipment
when installing these products.
It is the responsibility of the installer to meet or exceed all code
and safety requirements, and to obtain all required building
permits. These instructions are only a guide and may not
address every circumstance. The deck and railing installer
should determine and implement appropriate installation
techniques for each situation.
Fairway Architectural Railing Solutions shall not be
held liable for improper or unsafe installations.
OPTIONAL FAIRWAY® RAILING BRACKET ADAPTERS
V210 LEVEL Vinyl Railing Kits Include:
2 ea. - 2" x 3-1/2" V210 Vinyl Rail
2 ea. - V210 Aluminum Insert
4 ea. - V210 Mounting Bracket (Bracket and Trim Ring)
1 ea. - Pack S.S. Mounting Screws
* Vinyl Baluster - see grid below
V220 LEVEL Vinyl Railing Kits Include:
1 ea. - V220 Vinyl Top Rail
1 ea. - 2" x 3-1/2" V210 Vinyl Bottom Rail
1 ea. - V220 Aluminum Insert (Top Rail)
1 ea. - V210 Aluminum Insert (Bottom Rail)
2 ea. -V220 Mounting Bracket (Bracket and Trim Ring)
2 ea. - V210 Mounting Bracket (Bracket and Trim Ring)
1 ea. - Pack S.S. Mounting Screws
* Vinyl Baluster - see grid below
V210 STAIR Vinyl Railing Kits Include:
2 ea. - 2" x 3-1/2" V210 Vinyl Rail
2 ea. - V210 Aluminum Insert
4 ea. -
V210
Stair Mounting Bracket (Bracket and Trim Ring)
1 ea. - Pack S.S. Mounting Screws
* Vinyl Baluster - see grid below
V220 STAIR Vinyl Railing Kits Include:
1 ea. - V220 Vinyl Top Rail
1 ea. - 2" x 3-1/2" V210 Vinyl Bottom Rail
1 ea. - V220 Aluminum Insert (Top Rail)
1 ea. - V210 Aluminum Insert (Bottom Rail)
2 ea. - V220
Stair Mounting Bracket
(3/16" S.S. Pins & Screw Plugs)
2 ea. - V210
Stair Mounting Bracket (Bracket and Trim Ring)
1 ea. - Pack S.S. Mounting Screws & Pins
* Vinyl Baluster - see grid below
A - 45º V210 Rail Bracket Adapter
B - 22.5º/45º Internal Bracket
C - 45º V220 Rail Bracket Adapter
D - 22.5º V210/V220 Contour Rail
Bracket Adapter
E - V210 Round Column
Bracket Adapter (6"-10")
F -V220 Round Column
Bracket Adapter (6"-10")
A
C
D
x4
x2
x2
x4
x2
x2
x4
A B C D E F
Check all local building codes for design load requirements for your railing application. FAIRWAY® V200 Series Vinyl Railing is manufactured to the
standards outlined in ASTM F964 and has been tested according to AC174-09 criteria and is approved to meet the requirements for Guardrails as
outlined for pertaining IRC (Residential) and IBC (Commercial) applications as documented in the Code Compliance Research Report, CCRR-0153.
If your railing has any loose dirt on it from the installation, simply hose it off
or wipe with a soft cloth. To remove any stubborn dirt or stains use Simple
Green and #0000 steel wool.
• Measuring tape
• Pencil
• Drill
• 5/32" drill bit
• 7/32" drill bit
• #2 square drive bit
• Power miter saw
• Carbide blade
• Plastic
speed square
Suggested Tools
Cleaning
x2
x*
x*
x*
x2
x1
x1
x1
x1
x1
x1
x1
x1
x*
#10 - 2" Stainless Steel Screw • #2 Square Drive
#10 - 1-1/2" Stainless Steel Screw • #2 Square Drive
#10 - 1-1/2" Stainless Steel Screw • #2 Square Drive
#10 - 1-1/2" Stainless Steel Screw • #2 Square Drive
#10 - 1-1/2" Stainless Steel Screw • #2 Square Drive
x16
x8
x4
x8
x8x2
#10 - 3/4" Stainless Steel Screw • #2 Square Drive
#10 - 3/4" Stainless Steel Screw • #2 Square Drive
#10 - 3/4" Stainless Steel Screw • #2 Square Drive
x8
x8
x4
x16
#10 - 3/4" Stainless Steel Screw • #2 Square Drive
x8
x4
x2
x2 x1
x2
Baluster
Pocket
Baluster
Pocket
FAIRWAY ARCHITECTURAL RAILING SOLUTIONS ©2017
To Next Page
Need help?
General
