23
3. Turn over the radiator on the soft floor. When the radiator
is upside down, the liquid oil in it can be make a noise.
4. Pass U-shape bolt through the last stage of radiator.
(Picture4)
5. Pass U-shape bolt through holes on the wheel axle, tiighten
it with wing nut. (Picture 5)
6.Pass front stand part to the fixing holes while radiator is
upside down.
7.Fix the front stand part to the radiator body with the given
front stand screws. (Picture 6)
OVERVIEW
GB
Picture 3
Picture 4 Picture 5 Picture 6
To Next Page
Loading...
