Fakir Steam Mop User Manual (English)

Questions and Answers:

M
Michael SmithAug 4, 2025
Why are my floors cloudy after using the Fakir Steam Cleaner?
- R
  reginarodgersAug 4, 2025
  If your floors appear cloudy, streaky, or spotty after using the Fakir Steam Cleaner, the micro-fiber pocket might be dirty. Try flipping or changing the pocket. If you washed the pocket with powder detergent, it might be ruined. For kitchen areas with grease build-up, use a degreasing agent like an all-purpose cleaner or dish soap with paper towels beforehand. Avoid leaving the mop in one spot for too long. If you have hard water, consider switching to distilled water.
E
Erik WardAug 13, 2025
Why is my Fakir Steam Cleaner hard to push?
- F
  freemanvictoriaAug 13, 2025
  Ensure that the steam pocket is correctly attached to your Fakir Steam Cleaner. Also, check if the pocket is excessively dirty. For better leverage, try increasing the pole height.
P
pjordanAug 25, 2025
What to do if Fakir Steam Cleaner leaves water on the floor?
- J
  Joel EvansAug 25, 2025
  If your Fakir Steam Cleaner leaves water on the floor, check if the micro-fiber cleaning pocket is too wet. Unplug the steam mop and change the micro-fiber cleaning pocket. Ensure the steam pocket is attached correctly.

Fakir Steam Mop Specifications

General

Type	Steam mop
Capacity	- L
Cord length	6 m
Water tank capacity	0.45 L
Hard floor brush	Yes

Summary

IMPORTANT SAFETY INSTRUCTIONS

General Safety Precautions

Essential precautions for safe operation and handling of the steam mop.

Hot Steam & Usage Warnings

Caution regarding hot steam, user restrictions, and children/pets.

Operational & Environmental Safety

Guidelines on safe use, placement, cleaning, storage, and environment.

Floor Surface & Material Safety

Warnings about using on delicate materials, specific floor types, and testing areas.

Quick Start

Assembly Steps

Step-by-step guide for assembling the steam mop handle, head, and pad.

Filling the Water Tank

Instructions on how to safely fill the water tank using the provided flask.

Handle Adjustment and Steam Creation

How to adjust handle height and initiate steam generation by pumping.

TECHNICAL SPECIFICATIONS

Getting Started

Product Components Identification

Visual identification and listing of all included parts and accessories.

Initial Assembly Process

Detailed instructions for connecting the mop handle, selecting/attaching the mop head and pad.

Water Tank Filling Procedure

Procedure for filling the water tank with water, emphasizing distilled water for hard water areas.

Using Your Steam Mop

Pre-Use Preparations

Ensure mop is assembled, has water, and floors are clean before use.

Operation and Steam Generation

How to plug in, heat up, and use the pumping action to generate and control steam.

Handle Height Adjustment

Adjusting the telescopic handle to a comfortable working height.

Mop Head Flipping and Refilling

Flipping the mop head for dual-side use and refilling the water tank when empty.

Using Your Carpet Glider

Carpet Glider Functionality

How to use the carpet glider for deodorizing and freshening carpets/rugs.

Glider Usage Note

Important note that the glider is not a fixed attachment and not for stationary use.

Care of Your Steam Mop

After Use Procedures

Unplugging, cooling, releasing steam, and removing the cleaning pocket after use.

Cleaning Pocket and Tank Maintenance

Safely removing hot pockets, emptying the water tank, and caution with hot parts.

Storage Recommendations

Guidelines for storing the mop upright or hanging, and general storage safety.

Keeping Your Micro-Fiber Cleaning Pocket As Good As New

Washing Instructions

Recommended method for washing micro-fiber pockets using liquid detergent and line drying.

Thread Maintenance

How to trim loose threads on the cleaning pocket with scissors.

Troubleshooting Guide

Common Problems and Solutions

Addresses issues like the mop not turning on, not steaming, or leaving water on the floor.