Faller AS18-2 - Air Compressor Structure

EN
10
Operation:

The pressure gauge (e) indicates the working pressure.

Pull the regulator (d) up and turn it clockwise to increase the pressure.

To decrease, pull the regulator (d) up and turn counterclockwise. Do not
try to turn the regulator (d) when it is blocking.

Press the needle (g) on the bo om of the trap to drain water.
Air compressor structure:
No. Description No. Description
a. Power plug e. Pressure gauge
b. Power switch f. Connection
c. Handle g. Moisture trap/ Filter
d. Pressure regulator
Anleitung_Airbrush Compressor_AS18-2.indd 10 11.12.18 14:03