Falltech DuraTech 6 Mini - Page 15

TS6M1B.1
* Ulizes steel srrup connector to join Integral Swivel Eye to Connector.
See Figure 1 for example.
** Carabiner with Alignment Clip used to pair single leg SRDs into Twin-leg
All Anchorage Connectors shown below have 5,000 lb Minimum Tensile Strength and
3,600 lb minimum Gate Strength to comply with ANSI Z359.12
Below Carabiner has a 5,000 lb Minimum Tensile Strength and 3,600 lb Gate Strength to comply with ANSI Z359.12
Integral Housing Swivel Eye only
Rebar Hook
Carabiner with Capve Pin
Rebar Hook
Snap Hook
Carabiner with Capve Pin
Steel
Steel
Steel
Aluminum
Steel
Aluminum
Eye:
5/8”
2½”
.95”
2½”
.85”
.95”
Gate Opening
Gate Opening
.55”
Housing Swivel Eye Connector
Housing Swivel Eye Connector
Triple-lock Carabiner
with Alignment Clip
Connector
Connector
Material
Material
Steel
Table 1B: Specifications for Single-leg Swivel Eye Connectors
Specifications for Twin-leg Swivel Eye Connector
Part # Reference
Part # Reference
(B)**
A
E*
B
F*
D*
G
APPENDIX A
010819