Falltech DuraTech 6 Mini - 7.1 Pre-Use Inspection; 7.2 Inspection Frequency; 7.4 Inspection Results

010819
Inspect the SRD according to the procedures in Section 7 before returning it to service. If the SRD fails any portion of the inspection checklist,
remove it from service, tag the unit as “UNUSABLE”, and consult with the manufacturer.
6.2 Service: Remove the unit from service if it has been subjected to fall arrest forces. Tag the unit as “UNUSABLE” to prevent future use. The SRD
is not repairable.
6.3 Storage: Hang to store, out of direct sunlight. Ensure the lifeline is completely retracted into the housing. Avoid exposure to chemical agents
and vapors, airborne debris, and water ingress.
Store units tagged as “UNUSABLE” in a clearly marked area to prevent inadvertent use. Inspect any unit that has been stored for an extended time
in accordance with the procedures detailed in Section 7.
7. INSPECTION
7.1 Pre-Use Inspection: Perform an inspection before each use in accordance with the Inspection Checklist procedures in Table 3. See paragraph 7.4.
7.2 Inspection Frequency: OSHA 1910.66, OSHA 1926.502 and ANSI Z359.14 require an inspection by the Authorized Person before each use. In
addition, an inspection by a Competent Person at regular intervals is required. The Competent Person will use the information in the Inspection
Interval Table to determine the inspection frequency. See Table 2.
7.3 Inspection Checklist: Use the Inspection Checklist provided to inspect the SRD. See Table 3.
7.4 Inspection Results: If an inspection reveals defects in or damage to the equipment, inadequate maintenance or activated fall force indicators,
mark as “UNUSABLE” and remove the equipment from service.
7.5 Inspection Document: Record inspection results on the Inspection Record provided in Appendix B, or on a similar document.
8. LABELS
The labels must be present and legible.
FallTech
Style # 72706SB1
ANSI Z359.14
CLASS B
OSHA 1926.502
Max Arrest Distance: 25" (Without Freefall)
Max. Free-fall: 5 ft
Avg. Arrest Force: 900 lbs.
Capacity: 130 – 310 lbs.
Date of Mfr: 03-19-2015
SERIAL NUMBER: 2388392
READ AND FOLLOW INSTRUCTIONS SUPPLIED WITH
PRODUCT AT THE TIME OF SHIPMENT. REFER TO
INSTRUCTIONS FOR PROPER INSPECTION OF
ENERGY ABSORBER. DO NOT REMOVE LABEL.