Tips for a good “running in”
Before starting to use the sofa, the
seat cushion interiors have an initial
hardness slightly higher than the sofa
you tried at the store. During the rst
3 – 4 weeks of use, this hardness will
decrease a little bit and then it will
stay levelled. Therefore, during the
rst month of use, it is advisable to
seat on the different parts of the sofa
* See the drawing below, which shows how to seat on the different parts of the sofa during the rst weeks of use to get
a good “running in” of the sofa.
Sometimes, the seat or back cushion covers may show some small wrinkles. It is normal, and we can easily
remove them just passing our hand over them.
“How can I keep the cushions in my sofa as when they were new?”, “Can I wash the covers of my sofa in the
washing machine?” These are some of the videos that you can watch in our FAQs Section in www.fama.es.
OTHER USEFUL TIPS
to get a uniform “running in” of the
sofa.
The back cushion interiors are
normally made out of hollow bre.
At the beginning it may be too hard.
It is normal. We make it this way
because it will lose some volume
with use.
To make sure that your sofa “ages
decently”, we recommend you
to plump the back and scatter
cushions up regularly, just as you
normally do with your bed pillows.
To Next Page
Loading...