FANATEC PODIUM F1 User Manual

15
Slide any Fanatec Steering Wheel
with Simplied Quick Release onto
wheel base shaft.
Turn the Simplied Quick Release top-side down to see the bottom of the
clamp ring to follow next step below.
Push the Fanatec Steering Wheel until the bolt hole
aligns with the hole on the wheel base shaft.
It is recommend to turn the wheel base off before
attaching a steering wheel with Simplied Quick
Release. Centre the Quick Release shaft so the slot
is at the top.
6.4 Attaching a Steering Wheel
6.4.1 Attaching Fanatec Steering Wheels with Simplied Quick Release
Tighten bolt to x clamp ring mechanism, use only the
Allen key provided with the Fanatec Steering Wheel.
IMPORTANT: Tighten only by using the short lever
of Allen key!
Use the clamp ring bolt included with the Podium Racing Wheel
F1® package and use the Allen key included with your steering
wheel package.
Note: When a Fanatec steering wheel with
Simplied Quick Release is used on a Podium
Wheel Base, the torque will automatically reduce
to the level of the ClubSport Wheel Base V2.5.

FANATEC PODIUM F1 Specifications

General

Brand	FANATEC
Model	PODIUM F1
Category	Video Game Controller
Language	English